friendlyfashion.my

Author: Syafinaz Azmi

Why PPE Equipment is important in the Healthcare Sector

In the health sector, infection control guidelines have required medical practitioners to wear a set of PPE equipment, especially in critical and high-risk situations, such as the COVID-19 outbreak. According to the Occupational Safety and Health Administration (OSHA), PPE equipment is known by a longer name, personal protective equipment. Personal protective equipment (PPE) is equipment worn by professionals to minimize exposure to dangers that cause severe incidents at workplaces and illnesses.

The common workplace hazards that can be reduced through PPE equipment are chemical, radiological, physical, electrical, mechanical, and others. Usually, there are specially built cabinets for storing the equipment which is known as PPE cabinet Malaysia. Let’s read this article to know more about PPE equipment and its importance in the healthcare sector.

The Appropriate Time to use PPE Equipment

PPE equipment is necessary to be used whenever there is a high-risk exposure to hazards at the workplaces or on the sites where the employees need to go. However, in general, the Health and Safety Executive states that the use of PPE equipment should only be the final solution and only be used at times when the cross-risk cannot be prevented in other solutions. According to the hierarchy of hazard control shared by Lindsey Wilhite on the OnSite Safety, PPE is ranked at the bottom of the hierarchy as the least effective solution to control hazards. It is because PPE equipment only becomes effective when the employees come into contact with the hazards.

PPE equipment is never designed to prevent hazards from happening to the people who need to manage it! Nevertheless, PPE equipment is essential to be worn by employees especially people in the healthcare sector when they are exposed to hazardous chemicals, gases, viruses, and pathogens, and dealing with these such situations:

· Whenever utilising sharp or contaminated tools.

· Whenever do personal care tasks with other people.

· Whenever do a blood transfusion.

· Whenever there is a risk of blood or bodily fluids splashing into the eyes or face.

· Whenever there is a risk of blood or bodily fluids spilling in greater amounts at the operation theatre.

· Whenever do activities that risk infection transmission such as carrying out injections or moving and positioning.

Those situations can cause health practitioners to get cross-infection through blood, and bodily fluids, which can harm their well-being. That’s why the use of PPE equipment is necessary for those situations!

The Importance of using PPE Equipment Properly

The primary goal of PPE is to protect the healthcare practitioners from pathogens and other contaminants while providing patient care or involving in the high risk situations. The proper use of PPE does not only affect their safety but also the patients’ safety in the healthcare facility. It is critical that healthcare practitioners not only wear appropriate PPE, but also adhere to proper donning and doffing procedures. Improperly fitted PPE or improper removal of the items can spread pathogens to colleagues, around the facility, or/and society.

The use of PPE is still vital in handling dangerous situations that can cause cross-infection. If you would like to find the PPE cabinet to store the PPE equipment at your healthcare facility, you may check MyLab+ official website.

January 20, 2023
Construction Materials To Use For Your Project

One of the importance of construction industry Malaysia lies in the various types of materials used in construction projects. Ideally, the materials must be tough enough to keep structures standing for a very long time, or even better, eternally until it is brought down willingly or unwillingly.

Every material sports its own strengths and flaws, no matter how similar some properties may be in comparison. These materials will be common in any construction project, without which would pose a risk of structural collapse regardless of other materials like glass or whatnot.

Wood

Wood is the oldest material to be used in the history of human constructions, and it is still commonly used today thanks to its natural availability, strength, durability and flexibility. Wood works well with other materials including marble, steel and aluminium.

Wood is mainly divided into types including hardwood and softwood. Hardwood is sourced from trees including oak, teak, maple, cherry and walnut. For softwood, the sources are either spruce, pine, cedar, fir or hemlock.

Lightweight, wood boasts a high tensile strength and can be used as a soundproofing and insulation material, both thermal and acoustic.

Besides commercial and residential buildings, wood is also used to build floors, walls, ceilings, interiors like doors, and structural frames. Unfortunately, it is not very suitable for foundations or basement walls, and wood framed homes usually have reinforced concrete or pier beamed foundations instead.

Concrete

Concrete is another important material to utilize in most projects, and whenever you think of construction, concrete mixers would come to mind as the icons of this field. Composed of fine and coarse aggregate, such as gravel, crushed stone or recycled concrete, that are mixed with a binder such as cement and water, this mixture hardens over time when applied and left to set after building bricks or so.

Concrete takes seven days to cure and an average of 28 days to attain its maximum strength. In construction, reinforced concrete is commonly used and steel is embedded in to further strengthen the structural tensile. Lightweight and waterproof concrete are also examples of types that are commonly used depending on the projects.

Its mixture alone determines its strength. If you want to save costs and still manage to use concrete of the best quality, you would order a ready mixed concrete (RMC) from an RMC agent or so. They specialize in using quality materials and mixture techniques to ensure that your RMC is usable.

Concrete can be molded or poured into any shape and hardened like stone.

This material is mostly used to build foundations, residential or commercial buildings, bridges and sewers.

Steel

Steel is a metal alloy of iron and carbon, and often consist of other alloys too for reinforced strength and resistance to fractures. Besides its lightweight properties, using steel is easy work and shipping it is cheaper compared to other materials.

Steel does not deform easily, and can retain its structural properties even when bent. It takes a shorter amount of time to install than concrete in any place so long as it is installed properly. Otherwise, it will be susceptible to corrosion.

Steel can also break down in high temperature levels, and its fire resistance relies on its own type. Steel is mostly used to build structural sections, roofing products, utilities and internal fixtures.

January 13, 2023
Pros and cons of self service kiosk

Overview

In the current era people are more liking and attracted to the idea of being served or simply placing order via a self service kiosk. It is quick, efficient and gets work done much better. It also reduces human error. There is a balance of both advantages and disadvantages when it comes to the usage of self service kiosks.

Pros

1) Resource optimization

The tasks that call for precision, effectiveness, knowledge and consistency should be handled by machines rather than burdening the staff with it. The tasks like guiding customers and also processing orders can be done very easily with the help of the self service kiosk. All of this work would take much time for workers to do, perhaps staff can focus on matters like assembling the orders, maintaining the overall space and also to interact with customers and ask their satisfaction. Staff don’t necessarily have to cram themselves with too many tasks.

2) Reduces waiting time

Gone were the days when people needed to wait in the queue for hours to get their order placed and what makes it tough is that they would need to wait in the queue for the second time to collect their orders. With the self service kiosk, you are able to shorten your waiting time, you are able to quickly key in your desired order in the kiosk and the respective departments are also able to receive the order faster and work on your orders which would result in lesser waiting time. This works very similar to the queue management kiosk in malaysia.

Cons

Has limited customization

Sometimes when you make an order through the self service kiosk, you find yourself not being able to place your exact order according to your liking. This can be in the sense of the condiments wanted, their way of preparation and the packaging method. Not all kiosks are equipped with the features to edit the order according to your liking. As a result you would probably get an order that you are not interested in and that you have to eat it anyway. This could also result in poor communication and misunderstandings between the staff and also the workers.

Can be expensive

To set up a self service kiosk can be really pricey and bear in mind that you may need a few of it operating at your store in order to speed up the process. Once it is installed you would need to further maintain the kiosks to ensure it is working in a good condition. In case if it breaks down, you would need to get it fixed only in the service centers which is a hassle, you have the option to invite a technician over and get it fixed as well but it can really burn a hole in your pocket. The maintenance of the kiosk is a little pricey which is why it is not recommended for small businesses.

January 13, 2023
Improve your business with POS hardware vendors Malaysia!

In this modern world, there are many things that will use technology to do something. So to improve your business, better use POS hardware vendors Malaysia. All the transactions from the customer pay to will be recorded. It was really safe for the owner to know about it. They can check all the transactions that will be recorded on the system. It would also be helpful for the customer to use POS hardware vendors Malaysia for paying. The business also will be more developed and grow more than before this.

That was the reason why it was recommended to all businesses that had this in their business. POS hardware vendors Malaysia is really important in all businesses. Even if it ‘s just a small business, if there are people that are interested and need to pay you, they find you use hardware vendors. So they will love it because it will make it easier than needing to pay it with cash. Some people are really lazy to have cash in their hand.

Also, using a card will be more safe because they will always be there. For the cash I need to bank to an ATM machine to release them. So better use cards that need to be swiped. That is the reason why nowadays stores have hardware vendors to make the customer feel easier. Even though there are so many advantages but still disadvantages because of technology. Just need to know which is the best supplier for this kind of thing.

Some reasons why there are businesses not purchasing hardware vendors :

High cost

This is one of the reasons small businesses cannot afford this. Better for them to just use the old way because they need to save money. To purchase this is not that easy because it was a bit expensive for them that had a low budget. That was the reason why it was recommended for them to have BigPos service.

They will help all this small business to be a successful business. Also they will provide all this thing that they need. It was a machine thing so not be weird if the price is a bit expensive. That is the reason why certain places don’t have this in their place because they think it was pricier. Also they think that their place cannot afford to buy this thing yet. It was a basic reason for all the business people.

Maintenance

When it was related to technology, of course they needed to do some maintenance. So it will help the machine still be able to use it. The cost for maintenance was not low because it was really high. If the machine is damaged, it will be more expensive to replace all the things. Some of the time, I just need to buy a new one.

So it will make you need to afford all this thing. To keep the vendors still working they will need to do the maintenance once a month. This also avoids making the vendors damaged because they are afraid they need to change it. They need to use it well because the cost of maintenance is also not that low.

January 12, 2023
Storing lab equipments: The right way

Overview

Working in a laboratory can be real fun as you are getting hands-on experience with the experiments and research. However there are disadvantages on its own if you are not being careful in handling the lab equipment malaysia. Here are some laboratory storage tips for you in keeping all your equipment in a good condition and most importantly to protect you from any possible threats and danger.

Store items in closed areas

It is essentially important to store all glassware items or items that are corrosive in a closed area or more preferably in a closed cabinet or cupboard. Lab cabinets are the best option if you own many glassware items in your laboratory setting. This is mainly to ensure its safety and that it is organised. Sometimes when certain liquid items are placed on counter tops or simply in an open surface area, it is prone to spill and leakage. Accidents may also happen if people tend to knock it off. To avoid that from happening you can store it in an enclosed area. Besides, closed shelves help keep dust away from collecting on your lab items, keeping it clean always.

Labelling items

While keeping in all your lab equipment and items, it would be really useful for lab practitioners if you label them accordingly. To begin with you can maybe label them according to its name or its uses. You can also label them according to the projects that you are working on. Labelling would save you so much time when you are looking for items that you want. It would also keep your working area organized so that you would know which item to reach for while you are working on an experiment or project. It can also get really dangerous if you dont have the needed equipment with you right on time. Certain chemicals do not come with its label especially if you buy in big bulk, the usage of wrong chemicals for wrong practises would certainly cause you alot.

Maintenance of temperature

The temperature may be a key consideration while preserving glassware. By maintaining a constant room temperature, any variations that would lead to the glass breaking won’t happen. For instance, the temperature difference between a glass of boiling water and a tabletop could cause the glass to break. Similarly, glassware that is kept in a cold room may shatter if the temperature rises drastically. To avoid that from happening, you should know exactly how to control and maintain the temperature in laboratory

Avoid risk

Glassware should never be kept close to the edge of tables or other surfaces that have an open ending. This can possibly cause accidents where people could knock the items down causing it to shatter. All the equipment and the glass ones in specific should never be kept out for a longer time in an open area. While placing them in cabinets and shelves, ensure to not place it high up as you might face difficulties in reaching out to it, while trying to take it off, you might drop them. So try to do everything in moderation.

January 9, 2023
Choose a better paint for your house? Acrylic emulsion Malaysia!

As we know there are many types of paint in this world that will beautify the house or building that needs to be painted. One of the paints that famous people use is acrylic emulsion Malaysia. There are many benefits that they get from using it, it more suits the place that will have water around them. So the acrylic emulsion Malaysia will survive for a long time because it will not affect if they have water on it. Many people love to use them in the bathroom because they don’t want the painting to corrode.

Not just in the bathroom but also it still can be used as outdoor painting. When you choose the paint just need to know which is the best brand for it. Acrylic emulsion Malaysia like we know it has two mixes in them which are water and oil. So that will make the wall that uses it will be more shining. It will make the house maybe just a simple color but make it look like a rich person. Most people like to use it because it is affordable and makes the house more beautiful with this type of paint.

Other than just painting on the wall, acrylic emulsion also can be used on the textile. It was an interesting fact for acrylic emulsion because it was not easy for the paint to survive at the textile. Acrylic emulsion is the one paint that really most people in textile use. So it will be in the textile for a long time and it was really beautiful for the people that had them.

Disadvantage Acrylic Emulsion

Once dry, hard to remove

When you use it, you must keep in mind that the one is the one that you want to apply it. So when it is dry you do not regret it. It was more to the textile because you will draw any pattern on the textile. It will be more nice if you know what you are going to draw at the textile. If you are also not that good at drawing it will be better if you practice at first. Once you draw the pattern with acrylic it will be hard to remove it. So when you want to apply it anywhere you need to remember that it was easy to dry. Cannot be anything wrong if you apply it and must do it more quickly.

The color will be darker

When the acrylic emulsion dries the color it will be a bit darker than the color should be. So you must choose carefully about it. Also when you need to choose the color you must know what it will turn out not like you want. Just keep reminding yourself about it and do not regret whatever comes out.

So when you choose better to choose the different shade and it will be what you want. That is the disadvantage about acrylic emulsion but still it will be shining like an expensive paint. The fact it is still a bit higher cost than others. It is still affordable for the person who wants them but not all in the house use acrylic emulsion. It will be nice if just a certain place that will apply it.

December 30, 2022
A Few Tips When Researching About Investing

Whether you are going to invest through online banking services Malaysia or an online trading app, you may know well enough that research is the first step to take, and it can take time to finish researching because you want to know as much as you can about the world of investing and the market or entity that you want to invest your money into.

Although researching is a smart step to take, it solely depends on the sources you look into and how deep you have to dig to learn and obtain information. The term research alone is broad and whatever details that define it can be based on what you have found. If you fear that you might stumble upon sloppily painted signs instead of professionals, then worry not.

Avoid social media and forums

Social media and forums can be informative, but it depends on how truthful or experienced the posters are. If this is your first area to research, then tread cautiously. It is already hard enough to find and determine people’s expertise on the subject of investing. Everybody has their own ideas and methods to invest, and so will you.

Take everything with a grain of salt, or you can do the alternative by ignoring social media and forums at all. In fact, social media is the last thing that you want to resort to as your research tool. Places like Reddit and YouTube are not reliable because there are so called financial gurus that offer advice or encouragements about investing that may be questionable at best.

Typical users, on the other hand, are pretty self explanatory. Would you really trust a rando’s advice and gamble based on it?

Besides, hype is one aspect that makes information sporadic as you have schmucks implementing the FOMO principle by telling you to quickly invest while the market is heading “to the moon” and it will be a matter of time before you miss. Many amateur investors fall into this trend only to lose their invested funds or earn less than the initial sum when they sell.

Speaking of hype, here is a tip that you can also keep in mind right away. Never buy during the hype, because by the time you make up your mind and invest, it is already too late. Worse, hype can be associated with scams like pump and dump schemes as the organization or developers have already bought the shares and positioned themselves from there, then sell when the prices reach their peak during the ongoing trend.

Books

The Internet isn’t your sole source of research, you know? Digital or physical books are also useful resources to dig into. Find a title, look into reviews and have a sneak peek of the contents if possible so you can see whether the book is suitable to read or not.

Since you are likely new to investing, the books that you should read should fit beginners. If you are worried that you might not understand all the financial jargon, corporate speak and just advanced English in general, don’t sweat. There are books that are friendly to anybody with zero experience with finance and investing.

Of course, if you can get the gist of those wordy books, then nobody is stopping you, but those noob friendly books still can help you understand investing faster, especially with a language and tone that is relatable to you.

December 16, 2022
Boost Your Business With Republic Web Design Company Kuala Lumpur

Nowadays, it is getting harder and more competitive to outperform your online competitors in business. Although the Internet is a goldmine that provides many beneficial opportunities for merchants, businesspeople, and even for authorities like the government, it can also turn into a dense jungle that prevents other people from recognising you and your business. A web design company such as Republic Web Design company Kuala Lumpur can help you and your team if you want to increase both your digital footprint and your company image brand especially on the Internet.

Benefits of Collaborating With The Republic Agency

One of the top web design and development companies in Kuala Lumpur, Malaysia, is Republic Agency. It has collaborated with a reputable Malaysian low-cost airline, Volkswagen, Watsons, Kens Apothecary, Anlene, Nanyang Technological University, and many others. These businesses and institutions are the clients of Republic Agency who are pleased with the caliber and efficacy of their services.

Here are the other benefits of hiring Republic Agency to design your website:

(i) Increasing your company’s strengths

By employing the knowledgeable team at Republic Agency, you are actually holding a safe opportunity in your hands—the chance to grow your current business—in your hands. You might find it difficult to create a website for your business, but don’t worry; Republic Agency can do it for you. A recent Episerver study found that 92% of customers visit a brand’s website for reasons other than making a purchase. When you have a website for your business and commercial matters, the credibility of the site is also significantly increased. The credibility of the website will increase by up to 75%. From the Episerver’s study, you already know how impactful it is to have Republic Agency as your assistant to design your website, and increase customer engagement and online exposure of your brand and product on the Internet!

(ii) Customized web design

Republic Agency is motivated and aspires to create a website design for you that expresses your individuality and personality online and can help you set your company apart from rivals in the same industry. Your website won’t be boring to look at because Republic Agency will create an odd but expert template for it. It will also be more responsive and interesting to increase customer traffic!

(iii) Expert in SEO-friendly Website Design

You need to have an SEO-friendly website if you want to compete with your business’s rivals and gain more online recognition. Your company’s website will show up on the first SERP, also referred to as the Search Result Page, if it is SEO-friendly. In addition, Republic Agency will organise, structure, and improve the quality of the content on your website so that it is better suited to the “search intent” of your visitors.

The tactics Republic Agency will use to improve SEO on your website are listed below:

· Adapt your content to your audience’s search intentions.

· Create a compelling meta description and title tag.

· Create a responsive website for you.

· Use images that are related.

· Boost the page load time of your website.

· Join the links, both internal and external.

· Create specialised page URLs, among other things.

To collaborate with Republic Agency to create a beautiful, SEO-optimized, and user-friendly website, visit their website at https://republic.my/web-design/.

December 16, 2022
Elements involved in supply chain

What is a supply chain ?

A supply chain is a group of people and businesses responsible for producing a product and getting it to the consumer. The raw material producers are the first links in the chain, and the last is the van that delivers the finished product to the customer. A certified bv supply chain service in malaysia is crucial to ensure all internal works are done well.

The importance of supply chain management may be seen in the reduced costs and improved productivity that come from an optimised supply network. Companies work to enhance their supply chains in order to lower costs and maintain competitiveness. If the supply chain continues to exist in the fields of industry then the overall production can see improvement over the time. It would also increase workers efficiency.

Main elements in supply chain

Operations

This is the major foundation of the supply chain process is supply chain operations, which guarantees that your staff will always have work to do. To make sure that different supply chain stages stay on schedule, managers keep an eye on daily activities. Lean manufacturing practices, which constantly assess all processes to discover whether areas of your operations might be more efficient, are being embraced by many businesses today. The operations team can significantly enhance the supply chain system by keeping track of machinery to maintain efficiency or by anticipating when to reduce staffing.

Integration

A technique used by companies that reduces error and cuts costs is via collaboration with all the stakeholders. Each division’s integration with the other division brings together knowledge and creates teams within themselves. When teams are included in the flow of processes, managers tasks are more effective and efficient since it is simpler to keep track of overall operations and to pinpoint areas that could be possibly improved

Purchase

One of the most important things to know in advance is how your company’s supply chain will operate. What are the procedures that will be involved? It’s crucial to understand precisely what products to buy for your business. This includes materials, supplies, tools, and also the equipment. A good supply chain depends on hiring qualified purchasing staff and making sure that your employees understand inventory management. This guarantees that your business won’t run out of supplies as that is the main reason why production is considered delayed. The improper person in this role could tarnish your organisation by overspending on raw materials and putting a strain on your budget.

Distribution

The moment your product is delivered to clients, either directly from a store shelf or via direct delivery, it is considered as the end of the supply chain. Distribution along the supply chain must be carefully managed in order for products to reach their destination. A distributor’s objective of having products reach clients fast can be achieved by implementing third-party logistics (3PL) companies or implementing logistics software for staff to learn.

December 14, 2022
Why Should You Study Biomedical Degrees In Malaysia At RUMC?

The world of science is the world full of colourful and adventurous exploration. Are you a Science geek, who loves to carry out experimental activities, and keen to explore the beneficial potential of certain specimens toward the human nation and health? Do you feel that you have a strong passion for Biomedical degrees after completing your secondary or diploma studies? Are you interested in studying in Malaysia but at the same time, interested in acquiring a foreign immersion into a foreign culture? If the answers are ‘’YES’’, perhaps RUMC, Pulau Pinang, is the best tertiary educational institution for you to obtain and study Biomedical degrees in Malaysia! With a Biomedical degree, you can pursue a wide range of career options in the Biomedical field.

What Is A Biomedical Field?

Biomedical field is an interdisciplinary field that implements the combination of technological advances and concepts of science to the medical field. There are a few subfields in the biomedical field such as biotechnology, biomedical engineering, and so on.

Why RUMC Is A Good Choice To Study Biomedical Degrees?

a. Wonderful Way For Experiential Immersion Irish And Malaysian Culture And Professionalism

The Royal College of Surgeons in Ireland (RCSI) and University College Dublin are two renowned Irish medical universities, and RUMC is their Foreign University Branch Campus (UCD). This institution offers you different levels of pursuing academic dreams, including beginning your bachelor’s degree program. To learn the Irish medical curriculum, you should not miss out on the opportunity to pursue your studies at RUMC. Even though you currently reside in Malaysia, this will be an exciting experience as you receive a top-notch Irish education curriculum that will equip you with two different cultures of countries and professionalism between Ireland and Malaysia. Besides that, you could have knowledge expansion in those branches of medical fields such as the Biomedical field.

b. Value For Money

RUMC is keen to provide and offer a high-quality education at a value for money fee for their students. This is shown through the tuition fees for Malaysian students and international students that are below RM100,0000! The tuition fee for Malaysian students: RM620,000. Meanwhile, the tuition fee for international students: RM740,000.

At RUMC, you can pursue any level of education, including a Bachelor of Medicine, a Bachelor of Surgery, or a Bachelor of Obstetrics, and still enjoy a four-stars student living environment. The students will experience valuable moments as students and also tourists in Penang, that is known as “The Pearl of the Orient.” This island city has one of Malaysia’s most varied, cosmopolitan, and exciting cultures up to this point. To make your student’s life easier, every student room and the building are well-equipped with a variety of amenities like a washing machine, water heaters, Wi-Fi, swimming pool, gym, cycling track, meeting rooms, and small cooking areas.

c. Professional Guidance From Teaching Staff And Lecturers

At RUMC, students receive expert guidance and advice from outstanding professors who are specialists in their fields. The instructors and professors are dedicated to helping, educating, and forming you into future qualified doctors. In addition, students are known to develop close professional bonds with senior students at RUMC. As a result, interaction and the growth of mentor and mentee relationships among RUMC students become ingrained in this community.

Not only that, RUMC students have many opportunities to speak with working professionals in the fields of obstetrics, surgery, and medicine. The RUMC is committed to enabling its students to contribute and channel their talents into practical experience and building professional networks with other experts, in addition to their theoretical talent.

What Can You Do With Your Biomedical Degree?

After graduating and obtaining a Biomedical degree from RUMC, you could expand your talents and skills in joining these careers:

· Biomedical scientist

· Biotechnologist

· Clinical research associate

· Biochemist

· Forensic scientist

· Microbiologist

· Toxicologist

· Scientific laboratory technician

· Many more

December 13, 2022